| |
TM 9-2320-364-20-3
2-2767
Inspect hoses and tube between mast
control valve and cylinder for damage,
crimps or leaks.
(1) If hoses are damaged, crimped or
leaking secure loose fittings or
repair hose (Para 20-3 and
schematic Fig 2-63) or notify DS
Maintenance.
(2) If hoses are not damaged,
crimped or leaking, notify DS
Maintenance.
VISUAL INSPECTION
High pressure hydraulics [oil under 3100 psi (21,374 kPa) pressure] operate this equipment. Refer to
vehicle operator and maintenance manuals for hydraulic oil pressure. Never disconnect any hydraulic
line or fittings without first dropping pressure to zero. A high pressure oil stream can pierce body and
cause severe injury to personnel.
|