| |
TM 9-2320-364-20-3
2-2875
(1) START engine (TM 9-2320-364-10).
(2) Remove cap from SRW control
manifold supply override.
(3) Rotate manual override to unlock and
pull up.
(4) Operate SRW using manual control.
(a) If SRW does not operate, problem
is hydraulic. Perform Steps (5)
through (7) below and go to
Step 5 of this Fault.
(b) If SRW operates, problem is
electrical.
(5) Push down on manual override and
rotate to lock in down position.
(6) Install cap on manual override.
(7) Turn OFF ENGINE switch.
MANUAL OVERRIDE TEST
|