|
| |
TM 9-2320-364-20-4
12-121
Materials/Parts
Cable Ties (Item 26, Appendix C)
Sealing Compound (Item 77, Appendix C)
Tags, Identification (Item 88, Appendix C)
Locknut (10) (Item 140, Appendix F)
Lockwasher (2) (Item 206, Appendix F)
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Air system drained, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Caps, Vise Jaw (Item 9, Appendix G)
Socket Set, 1/2 in. Deep Well
(Item 60, Appendix G)
Vise, Machinist’s (Item 75, Appendix G)
Wrench, Combination 1-1/16 in.
(Item 78, Appendix G)
Wrench, Combination 1-1/8 in.
(Item 79, Appendix G)
Wrench, Combination 1-3/8 in.
(Item 82, Appendix G)
12-27. AIR RESERVOIR NO. 1 REPLACEMENT.
a.
Removal.
(1)
Open front access cover (1).
NOTE
Tag and mark air lines before removing.
(2)
Remove air lines 2994 (2) and 2993 (3) from tee (4) on right side of air reservoir (5).
(3)
Remove air line 2184 (6) from elbow (7) on right side of air reservoir (5).
|
