(1) Loosen four screws and remove
(2) Turn ON ENGINE switch
(3) Check LED #3 lamp for illumination.
(a) If LED #3 lamp is not illuminated, go
to Step 6 of this Fault.
(b) If LED #3 lamp is illuminated,
perform Step (4) below and go to
Step 4 of this Fault. LED #3 lamp
(4) Turn OFF ENGINE switch.
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may
result. Damage to equipment, injury or death
to personnel may occur.
LED #3 LAMP