(1) Connect positive (+) multimeter lead to
relay R36 terminal 86.
(2) Connect negative () multimeter lead to
a known good ground.
(3) Turn on engine switch
(a) If 22 to 28 vdc are not present,
perform Step (4) below and repair
wire 1731 (see schematic Fig
2-76) or notify DS Maintenance.
(b) If 22 to 28 vdc are present, perform
Step (4) below and go to Step 10 of
(4) Turn OFF ENGINE switch.
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may
result. Damage to equipment, injury or death to
personnel may occur.