|
| |
TM 9-2320-364-20-4
4-6
Materials/Parts
Gasket (Item 63, Appendix F)
Screws (3) (Item 312, Appendix F)
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Fuel/water separator drained, (Para 4-15)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Pan, Drain (Item 47, Appendix G)
4-3. FUEL PRIMING PUMP FILTER REPLACEMENT.
a.
Removal.
Fuel is very flammable and can
explode easily. To avoid serious
injury or death, keep fuel away
from open fire and keep fire
extinguisher within easy reach
when working with fuel. Do not
work on fuel system when engine
is hot. Fuel can be ignited by hot
engine.
(1)
Place drain pan under fuel priming
pump (1).
(2)
Remove three screws (2), cover (3),
gasket (4) and filter (5) from fuel priming
pump (1). Discard screws and gasket.
b.
Cleaning/Inspection.
(1)
Clean particles from magnetic cover.
(2)
Clean filter, nylon mesh screen can be rinsed
out or blown out with air pressure.
(3)
Inspect all parts for cracks and other signs
wear.
(4)
Replace all damaged parts.
|
