Loosen clamp (37) on aspirator hose (17).
Remove aspirator hose (17) and clamp (37)
from muffler stack (38).
Remove aspirator hose (17) from truck (36).
Remove quick edge molding (39) from rear
Remove straight adapter (41) from pipe
Note position of elbow and pipe
nipple prior to removal.
Remove pipe nipple (42) from elbow (43).
Remove elbow (43) from air intake pipe
Remove straight adapter (44) from air
intake pipe assembly (4).
Remove fitting (45) from air intake pipe
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Apply sealing compound to fitting (45).