| |
TM 9-2320-364-20-4
4-79
Materials/Parts
Cable Ties (Item 25, Appendix C)
Sealing Compound (Item 72, Appendix C)
Tags, Identification (Item 88, Appendix C)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Fuel/water separator drained, (Para 4-15)
Differential pressure switch removed, (Para 7-84)
Tools and Special Tools
Tool Kit, General Mechanics: Automotive
(Item 74, Appendix G)
Cap and Plug Set (Item 8, Appendix G)
Pan, Drain (Item 47, Appendix G)
4-16. FUEL/WATER SEPARATOR AND BRACKET REPLACEMENT.
Materials/Parts - Continued
Locknut (2) (Item 106, Appendix F)
Locknut (8) (Item 140, Appendix F)
Packing, Preformed (2) (Item 231, Appendix F)
a.
Removal.
Fuel is very flammable and can explode easily. To avoid serious injury or death, keep fuel away
from open fire and keep fire extinguisher within easy reach when working with fuel. Do not
work on fuel system when engine is hot. Fuel
NOTE
Remove cable ties as
required.
Tag and mark wires and
hoses prior to removal.
Note location and position of
elbows and tees prior to
removal.
Connectors are removed by
gently prying on tab and
pulling connector apart.
(1)
Position drain pan under fuel/water
separator (1).
(2)
Disconnect fuel pump MC108 connector (2)
from wire harness connector (3).
(3)
Disconnect heater MC107 connector (4)
from wire harness connector (5).
|