|
| |
TM 9-2320-364-20-4
7-25
(2)
Disconnect voltage regulator harness (6)
from voltage regulator (7).
(3)
Remove two screws (8), lockwashers (9),
washers (10) and voltage regulator (7) from
electric bracket (5). Discard lockwashers.
b.
Installation.
NOTE
Install cable ties as required.
(1)
Install voltage regulator (7), two
washers (10), lockwashers (9) and screws
(8) on electric bracket (5).
(2)
Connect voltage regulator harness (6) on
voltage regulator (7).
(3)
Install splash guard (4), four washers (3),
lockwashers (2) and screws (1) on electric
bracket (5).
c.
Follow-On Maintenance:
Connect batteries, (Para 7-87).
Install left side noise panel, (Para 17-28).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
