7-74. FUEL PRESSURE TRANSDUCER REPLACEMENT (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
Apply sealing compound to threads of transducer (2).
Install transducer (2) on manifold (3).
Connect MC69 connector (1).
Install left side noise panel, (Para 17-28).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK