With the aid of an assistant, remove two
locknuts (6), screws (7) and cushion clips (8)
from crossmember (9). Discard locknuts.
Disconnect air line 2338 (1) from
Remove fitting (10) from tee (11).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Install cable ties as required.
Apply sealing compound on threads of
Install fitting (10) on tee (11).
Install air line 2338 (1) on fitting (10).