12-9. AXLES NO. 1 AND 2 AIR CHAMBER REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
Apply sealing compound to first four
threads of the air chamber (5).
Install air chamber (5) into brake
assembly (8) until air chamber bottoms
out in brake assembly.
Air chamber can only be turned out a maximum of one turn. Failure to comply may result
in damage to equipment.
Rotate air chamber (5) to align air ports.
Perform Steps (g) and (h) if removed.
Coat threads of elbow (4) and tee (2) with sealing compound.
Install tee (2) and elbow (4) in air chamber (5).
Refer to Table 12-1 for air line numbers.
Install air line (3) on elbow (4).
Install two air lines (1) on tee fitting (2).