|
| |
TM 9-2320-364-20-5
14-20
14-8. STEERING COLUMN SHAFT REPLACEMENT (CONT).
(2)
Remove steering shaft assembly (4) from
bearing (5).
(3)
With the aid of an assistant, remove three
nuts (6), screws (7), retaining plate (8),
bearing (5) and retaining plate (9) from
cab (10). Discard lockwashers.
NOTE
Note location and position of yoke on steering gear prior to removal.
(4)
Remove locknut (11), screw (12) and steering shaft (13) from steering gear (14). Discard locknut.
b.
Installation.
NOTE
Ensure yoke on steering gear is installed as noted prior to removal.
(1)
Install steering shaft (13) on steering gear (14) with screw (12) and locknut (11).
|
