|
| |
TM 9-2320-364-20-5
15-53
Materials/Parts
Locknut (5) (Item 146, Appendix F)
Pin, Cotter (Item 269, Appendix F)
Pin, Cotter (Item 278, Appendix F)
Pin, Roll (Item 280, Appendix F)
Pin, Roll (Item 281, Appendix F)
Pin, Roll (Item 282, Appendix F)
Pin, Roll (Item 283, Appendix F)
Pin, Roll (Item 284, Appendix F)
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Compressor Unit, Air (Item 11, Appendix G)
Gloves, Chemical Oil Protective
(Item 28, Appendix G)
Goggles, Industrial (Item 30, Appendix G)
Gun, Airblow (Item 31, Appendix G)
Socket Set, 3/4 in. (Item 61, Appendix G)
Socket, Wheel Bearing Adjustment Nut 3-1/4 in.
(Item 63, Appendix G)
Wrench, Combination (Item 87, Appendix G)
Torque Wrench (0 to 600 lb-ft [0 to 814 N.m])
(Item 97, Appendix G)
Lifting Device, Minimum Capacity 100 lb (45 kg)
15-20. SELF-GUIDED COUPLER REPAIR.
a.
Removal.
Self-guided coupler weighs 100 lbs (45 kg). Attach suitable lifting device prior to removal to
prevent possible injury to personnel.
(1)
Attach lifting device to self-guided coupler (1).
(2)
Remove hose clamp (2) and boot (3) from self-guided coupler (1).
(3)
Remove cotter pin (4), nut (5) and washer (6) from self-guided coupler (1). Discard cotter pin.
(4)
Remove self-guided coupler (1) from sleeve (7).
|
