17-8. CAB DOOR AND HINGE REPLACEMENT (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
Apply sealing compound to hinge holes on cab assembly (5).
With the aid of an assistant, line up door assembly (1) with cab assembly (5) and install nine screws (8) in
cab assembly (5).
Remove lifting device and lifting strap from door assembly (1).
Shut door assembly (1) and check operation. If door does not shut properly, repeats Steps (7) and (9),
realign door assembly (1) and tighten 18 screws (8).
Install door strap (4) and lockwashers (7) on door assembly (1) with two screws (6).
Install spacer (3) and door strap (4) on cab assembly (5) with two screws (2).
Apply metal sealant to all seams and joints of door assembly (1).
Roll up window on door assembly (1).
Adjust door, (Para 17-7).
Install mirror bracket, (Para 19-3).
Install amber reflector, (Para 19-2).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK