|
| |
TM 9-2320-364-20-5
13-4
13-2. WHEEL/TIRE ASSEMBLY REPAIR (CONT).
(6)
Remove and discard two preformed packings (8) from valve stems (6).
(7)
Remove twelve lug nuts (9) from studs (10).
(8)
Remove CTIS wheel valve assembly (2) from outer wheel (11).
Keep hands clear of studs and outer face of wheel to prevent injury to personnel.
NOTE
A tire iron can be used to lift the outer wheel.
(9)
Pry outer wheel (11) and tire (12) apart.
(10)
Remove outer wheel (11) from inner wheel (13).
Wheel/tire assembly weighs 523
lbs (237 kg). Attach suitable
lifting device prior to moving to
prevent possible injury to
personnel.
(11)
Attach lifting device to wheel/tire assembly (1).
(12)
Raise and turn wheel/tire assembly (1) over
so inner wheel (13) center rests on wooden
block. Lower tire (12).
(13)
Remove lifting device from wheel/tire assembly (1).
(14)
Pry inner wheel (13) and tire (12) apart.
|
