|
| |
TM 9-2320-364-20-5
18-73
Material/Parts
Locknut (6) (Item 91, Appendix F)
Locknut (3) (Item 93, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Socket Set 3/4 in. Drive (Item 61, Appendix G)
18-14. SELF-RECOVERY WINCH (SRW) FRONT GUIDE REPLACEMENT.
a.
Removal.
Front guide assembly weighs
75 lbs (34 kg). Use an
assistant to prevent injury
to personnel.
Leave top front screw
installed in frame to prevent
spacer from falling. Failure
to comply may result in
injury to personnel.
(1)
With the aid of an assistant, remove three
screws (1) and locknuts (2) from guide
assembly (3). Discard locknuts.
(2)
With the aid of an assistant, remove six
locknuts (4), four screws (5), one screw (6)
and guide assembly (3) from frame (7).
Discard locknuts.
(3)
Remove spacer (8) and remaining screw (6)
from frame (7).
|
