18-15. SELF-RECOVERY WINCH (SRW) REAR TENSION GUIDE REPAIR (CONT).
With the aid of an assistant, install two
screws (8), screws (9), four locknuts (10)
and adapter plate (7) to frame (5).
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
Apply sealing compound to four screws (6).
Rear tension guide weighs 50 lbs
(23 kg). Use an assistant to
prevent injury to personnel.
With the aid of an assistant, install rear
tension guide assembly (4) and four screws
(6) on adapter plate (7).
Lubricate self-recovery winch rear tension guide, (Para 2-9).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK