|
| |
TM 9-2320-364-20-5
19-17
NOTE
Steps (5) through (8) are performed outside cab.
(5)
Remove cone (9) and boot (10) from idler shaft (8).
(6)
Remove nut (11) from idler shaft (8).
(7)
Remove washer (12) and gasket (13) from idler shaft (8). Discard gasket.
NOTE
When screws are removed, idler shaft will drop to floor of cab.
(8)
Remove two screws (14) and idler shaft (8) from cab shell (15).
b.
Installation.
NOTE
Steps (1) through (3) are performed outside cab.
Position idler shaft to stay in cab shell without support.
(1)
Install idler shaft (8) in cab shell (15) with two screws (14).
(2)
Install gasket (13), washer (12) and nut (11) on idler shaft (8).
(3)
Install boot (10) and cone (9) on idler shaft (8).
|
