|
| |
TM 9-2320-364-20-5
19-50
19-15. HEATER HOSES AND FITTINGS REPLACEMENT (CONT).
(11)
Remove hose clamp (22) and return hose (6)
from heater core (23).
(12)
Remove return hose (6) from truck.
(13)
Remove hose clamp (24) and supply
hose (25) from heater core (23).
(14)
Remove supply hose (25) from truck.
b.
Installation.
(1)
Install supply hose (25) on heater core (23)
with hose clamp (24).
(2)
Install return hose (6) on heater core (23)
with hose clamp (22).
(3)
Install supply hose (20) on heater control
valve (21) with two hose clamps (19).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(4)
Apply sealing compound on threads of
fitting (18).
(5)
Install fitting (18) in heater control valve
bracket (16).
(6)
Install supply hose (8) on fitting (18) with
hose clamp (17).
(7)
Install screw (14), cushion clip (15) and
locknut (13) on heater control valve
bracket (16).
|
