|
| |
TM 9-2320-364-20-5
20-23
Prolonged contact with
lubricating oil (MIL-L-2104) may
cause a skin rash. Skin and
clothing that come in contact
with lubricating oil should be
thoroughly washed immediately.
Saturated clothing should be
removed immediately. Areas in
which lubricating oil is used
should be well-ventilated to keep
fumes to a minimum.
Use care not to damage recessed
groove in filter head when
removing preformed packing.
NOTE
Note shape and position of each
preformed packing during
removal.
(3)
Remove hydraulic filter bowl (1), filter
element (2) and preformed packings (3)
and (4) from filter head (5). Discard filter
element and preformed packings.
b.
Installation.
NOTE
Install preformed packings as noted prior to removal.
(1)
Lubricate preformed packings (3) and (4) with clean hydraulic oil and install in filter head (5).
(2)
Install filter element (2) and hydraulic filter bowl (1) on filter head (5) and tighten to 60 lb-ft (81 N.m).
c.
Follow-On Maintenance:
Check hydraulic fluid level, (TM 9-2320-364-10).
Start engine, (TM 9-2320-364-10).
Check hydraulic system for leaks, (TM 9-2320-364-10).
Shut OFF engine, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
