|
| |
TM 9-2320-364-20-5
20-49
(11)
Install clevis (43), clevis pin (42) and cotter
pin (41) on plate (40).
(12)
Install plate (40) on hydraulic reservoir (22)
with two lockwashers (39) and screws (38).
(13)
Install clip bracket (37), flat washer (36),
lockwasher (35) and screw (34) on
hydraulic reservoir (22).
Hydraulic reservoir weighs 120
lbs (54 kg). Use the aid of an
assistant to install to prevent
injury to personnel.
Use caution when installing
hydraulic reservoir. Hose on the
rear of reservoir may be
damaged if caution is not taken.
(14)
With the aid of an assistant, position
hydraulic reservoir (22) on fender (33).
(15)
Install screw (32) and locknut (31) on
hydraulic reservoir (22). Tighten locknut to
90 lb-ft (122 N.m).
(16)
Install three screws (30) and locknuts (29)
on hydraulic reservoir (22). Tighten
locknuts to 45 lb-ft (61 N.m).
|
