| |
TM 9-2320-364-20-5
20-53
Materials/Parts
Gasket (Item 51, Appendix F)
Lockwasher (27) (Item 180, Appendix F)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Hydraulic reservoir drained, (Para 20-11)
Fluid level gage removed, (Para 20-15)
Main hydraulic reservoir filter assembly removed,
(Para 20-10)
Tools and Special Tools
Tool Kit, General Mechanics: Automotive
(Item 74, Appendix G)
Socket Set, 3/8 in. (Item 62, Appendix G)
Strainer Tool (Item 65, Appendix G)
Wrench, Pipe 3 1/2 in. Opening
(Item 91, Appendix G)
Wrench, Torque (0 to 60 N.m)
(Item 98, Appendix G)
20-13. HYDRAULIC RESERVOIR STRAINER REPLACEMENT.
Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing
that come in contact with lubricating oil should be thoroughly washed immediately. Saturated
clothing should be removed immediately. Areas in which lubricating oil is used should be
well-ventilated to keep fumes to a minimum.
NOTE
Note position of bracket prior to removal.
(1)
Remove screw (1), lockwasher (2), washer (3) and bracket (4) from reservoir bracket (5). Discard
lockwasher.
(2)
Remove 26 screws (6) and lockwashers (7) from lid (8). Discard lockwashers.
(3)
Remove lid (8) and gasket (9) from hydraulic reservoir (10). Discard gasket.
|