21-6. ARCTIC KIT WATER PUMP
Slide clamp (15) on hose (16), rotate water
pump (22) to the right and install hose on
Tighten clamp (15) to 40 lb-in (5 N.m).
Ensure matchmarks are aligned
on water pump and bracket.
Reposition water pump (22) on bracket
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Apply adhesive to rubber pad (21) and
install rubber pad on clamping bracket (19).
Install clamping bracket (19) on water
pump (22) and bracket (20) with two screws
(18) and locknuts (17).
Install screw (25), nut (24) and bracket (26)
on bracket (20).