|
| |
TM 9-2320-364-20-5
13-42
13-10. CENTRAL TIRE INFLATION SYSTEM (CTIS) FRONT AND REAR
MANIFOLD REPAIR (CONT).
c.
Assembly.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, washer
immediately with soap and
water.
NOTE
Perform Steps (1) and (2) for rear
manifold only.
(1)
Apply sealing compound to threads of
plug (50).
(2)
Install plug (50) in porting block (38).
(3)
Install mounting plate (49) and five screws
(48) on porting block (38).
(4)
Install ball (47), spring (46), retainer (45)
and preformed packings (44), (43), (42) and
(41) in porting block (38).
(5)
Position diaphram (40) spring (39), quick
release valve (9) and four screws (37), in
power manifold (17).
Lowering the manifold directly
onto the porting block without
any side movement, will ensure
the preformed packings will
remain in grooves until screws
are installed. Failure to comply
could result in a faulty manifold.
(6)
While holding down quick release valve (9),
position manifold (17) above porting block
(38), and install four screws (37).
|
