21-31. CONTAINER HANDLING UNIT (CHU) SLIDER ARM ASSEMBLY REPAIR (CONT).
Install grease fitting (11) and grease fitting
(12) in arm assembly (4).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
Apply sealing compound to threads of four
Install quantity of shim(s) as
noted during disassembly.
Install handle (9) and shim(s) (10) with four
screws (8) on arm assembly (4).
Sealing compound is applied to
metallic side of thrust washer.
Apply sealing compound (loctite 680) to
thrust washer (7).
Apply adhesive (loctite 409) to six points in
recessed groove for preformed packing (6).
Thrust washer is properly
installed with metallic side to arm
Install thrust washer (7), preformed packing
(6) and seal (5) in arm assembly (4).