Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Coat threads of two plugs (2) and reducer
bushing (4) with sealing compound.
Install two plugs (2) and reducer bushing (4)
in housing (1).
Coat threads of vent (3) with sealing
Install vent (3) in reducer bushing (4).
Two-thirds is approximately
1/4 in. (6 mm) above output
Position housing (1) with pinion
housing (10) hole facing up. Fill two-thirds
full with grease.
Apply sealing compound to threads of four
Install pinion housing (10) and gasket (12)
on housing (1) with four screws (11).
END OF TASK