|
| |
TM 9-2320-364-34-2
12-69
Intermediate steering gear weighs 170
lbs (77 kg). Attach lifting device prior
to moving steering gear to prevent
injury to personnel.
(20)
Attach lifting device to steering gear (6).
(21)
Remove steering gear (6) from chain vise.
(22)
Remove lifting device from steering gear (6).
b.
Installation.
(1)
Attach lifting device to steering gear (6).
(2)
Position steering gear (6) in chain vise.
(3)
Remove lifting device from steering gear (6).
NOTE
Install cable ties as required
Install elbows as noted prior
to removal.
(4)
Apply hydraulic oil to preformed
packing (34).
(5)
Install preformed packing (34) on
elbow (33).
(6)
Install elbow (33) in steering gear (6).
(7)
Apply hydraulic oil to preformed
packing (32).
(8)
Install preformed packing (32) on
elbow (31).
(9)
Install elbow (31) in steering gear (6).
(10)
Position rubber boot (30) on steering
gear (6).
(11)
Position bracket (10) on steering gear (6)
with six lockwashers (27) and screws (26).
(12)
Position two washers (29), lockwashers
(27) and screws (28) in bracket (10).
(13)
Tighten screws (26) and (28) in sequence
shown to 153 to 187 lb-ft (207 to 254 N.m).
(14)
Recheck torque on screws (26) and (28).
|
