| |
TM 9-2320-364-34-2
12-79
Steering gear weighs 165 lbs (75 kg).
Attach suitable lifting device prior to
installation to prevent possible injury to
personnel.
(21)
With the aid of an assistant, install steering
gear (4) and bracket (21) on frame (22) with
four screws (18) and (19) and locknuts (20).
(22)
Remove lifting device from steering gear (4).
NOTE
Install cable ties as required
Install elbows as noted prior
to removal.
(23)
Apply hydraulic oil to two preformed
packings (12).
(24)
Install two preformed packings (12), hose
2275 (10) and hose 2276 (11) on elbows (13)
and (14).
(25)
Install pin (16) and clip (15) in hard lift
point (17).
(26)
Install drag link (9) in pitman arm (8) with
screw (7), lockwasher (6) and nut (5).
(27)
Install end yoke (3) on steering gear (4) with
screw (1) and locknut (2).
c.
Follow-On Maintenance:
Lube steering gear and pitman arm,
(TM 9-2320-364-20).
Start engine, (TM 9-2320-364-10).
Turn steering wheel back and forth three
times.
Shut off engine, (TM 9-2320-364-10).
Check steering reservoir,
(TM 9-2320-364-20).
Fill steering reservoir as required,
(TM 9-2320-364-20).
Perform steering adjustments, (Para 12-8).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|