|
| |
TM 9-2320-364-34-2
3-60
3-6. ENGINE LIFTING BRACKETS REPLACEMENT (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
NOTE
Perform Steps (13) through (20) for right engine lifting bracket only.
(13)
Apply primer and sealing compound to threads of screw (14).
(14)
Position gasket (20) and engine lifting bracket (17) on cylinder head (13) with clip (16), lockwasher (15)
and screw (14).
(15)
Apply primer and sealing compound to threads of screw (11).
(16)
Position cylinder head support bracket (10) on cylinder head (13) with lockwasher (12) and screw (11).
(17)
Position two washers (9), lockwashers (8) and screws (7) in cylinder head support bracket (10).
(18)
Tighten screw (18) on engine lifting bracket (17) to 23 to 26 lb-ft (31 to 35 N.m).
(19)
Tighten screw (14) on engine lifting bracket (17) to 41 to 47 lb-ft (56 to 64 N.m).
(20)
Tighten two screws (7) and screw (11) on engine lifting bracket (17) to 35 to 38 lb-ft (47 to 52 N.m).
|
