|
| |
TM 9-2320-364-34-2
3-117
(15)
Insert 0.0015 in. (0.0381 mm) feeler gage
between end of valve bridges (1) and (2)
and exhaust valve stem (6).
(16)
Press down on top surface of valve
bridges (1) and (2). Feeler gage must
remain tight against valve (6) and valve
bridge (1) and (2).
(17)
Repeat Steps (15) and (16) for other end of
valve bridges (1) and (2).
c.
Follow-On Maintenance:
Install fuel injectors, (Para 4-2).
Install engine brake retarders, (Para 3-32).
Install rocker arms, (Para 3-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
