|
| |
TM 9-2320-364-34-2
3-139
(24)
With the aid of an assistant, position
crossmember (13) between gussets (12)
and (18).
(25)
Install screw (20) and locknut (19) in spring
bracket hanger (21).
NOTE
To install locknuts in top gusset
and crossmember, position
extension rod through holes in
bottom gusset and crossmember.
(26)
With the aid of an assistant, install four
screws (15) and locknuts (14) in top
gusset (18) and crossmember (13).
(27)
With the aid of an assistant, install two
screws (17) and locknuts (16) in top gusset
(18) and crossmember (13).
(28)
Install four screws (15) and locknuts (14)
in bottom gusset (12) and crossmember
(13).
(29)
Install two screws (11) and locknuts (10) in
bottom gusset (12) and crossmember (13).
(30)
Position two spacers (9) on torque rod
screws (8) and push torque rod screws
through holes in crossmember (13).
(31)
Install spacer plate (7), two washers (6) and
locknuts (5) on torque rod screws (8).
|
