Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Perform Steps (1) and (2) only if
breather tube was removed.
Apply sealing compound to breather
Install breather tube (9) in engine block (19)
to height noted during removal.
Position hose (3) and two clamps (1) on
breather tube (16).
Apply sealing compound to two screws (14).
Install cushion clip (12) on bracket (13) with
locknut (10) and screw (11).
Install gasket (17) and breather tube (16) in
right cylinder head (18) with two
lockwashers (15) and screws (14). Tighten
screws to 60 lb-in (7 N.m).