| |
TM 9-2320-364-34-2
3-162
Materials/Parts
Grease (Item 21, Appendix B)
Sealing Compound (Item 53, Appendix B)
Sealing Compound (Item 56, Appendix B)
Tags, Identification (Item 72, Appendix B)
Clamp (Item 28, Appendix E)
Clamp (Item 30, Appendix E)
Gasket (Item 65, Appendix E)
Gasket (Item 72, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Spare tire removed, (TM 9-2320-364-10)
Cab engine access panel removed,
(TM 9-2320-364-20)
Exhaust tubes removed, (TM 9-2320-364-20)
Right side noise panel removed,
(TM 9-2320-364-20)
Right front fender skirt removed,
(TM 9-2320-364-20)
Cooling system drained, (TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanics
(Item 240, Appendix F)
Pan, Drain 4 Gal (Item 144, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
3-29. ENGINE OIL COOLER ASSEMBLY REPLACEMENT.
Materials/Parts - Continued
Gasket (Item 120, Appendix E)
Lockwasher (12) (Item 291, Appendix E)
Seal (Item 567, Appendix E)
a.
Removal.
(1)
Loosen two clamps (1) and remove water hose (2) from hump hose (3).
(2)
Remove hump hose (3) and two clamps (1) from water pump (4).
|