|
| |
TM 9-2320-364-34-2
3-171
(8)
Remove three screws (19) and washers (20)
from oil cooler adapter plate (21).
Use extreme caution when
removing oil cooler adapter
plate from engine. Ensure oil
cooler adapter plate is fully
supported upon removal of three
screws or component may fall
and damage to parts may occur.
(9)
Remove three screws (22), oil cooler adapter
plate (21), two gaskets (23) and spacers (24)
and (25) from engine (18). Discard gaskets.
Use extreme care when
removing spring from oil cooler
adapter plate. Spring is under
tension and can act as a
projectile when released.
Ensure all personnel wear
proper eye protection to prevent
possible injury to personnel.
(10)
Remove plug (26), washer (27), spring (28)
and valve (29) from oil cooler adapter
plate (21). Discard spring and washer.
b.
Installation.
(1)
Install valve (29), spring (28), washer (27)
and plug (26) in oil cooler adapter
plate (21). Tighten 25 to 30 lb-ft
(34 to 41 N.m).
|
