3-30. ENGINE OIL COOLER ADAPTER REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Apply sealing compound to threads of
adapter (7) and angle valve (5).
Install adapter (7) in oil cooler elbow (2).
Install angle valve (5) in adapter (7).
Position upper hose clamp (1) on oil cooler
Position oil cooler elbow (2) on water
Install hose (4) and hose clamp (3) on angle
Tighten upper hose clamp (1) on oil cooler
Install oil cooler, (Para 3-29).
Install oil filter, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK