4-3. AIR INLET HOUSING REPLACEMENT (CONT).
Remove ten screws (4) and lockwashers (5)
from air inlet housing (6). Discard
Use extreme care when
removing air inlet housing from
blower. Failure to comply may
result in serious scratching or
denting of blower.
Remove air inlet housing (6) and gasket (7)
from blower (8). Discard gasket.
Preformed packings may
come off with air inlet
housing or may remain on
Place clean, dry cloth over
blower to keep blower free
Remove and discard two preformed
packings (9) from air inlet housing (6) or