|
| |
TM 9-2320-364-34-2
4-38
4-8. TURBOCHARGER REPLACEMENT (CONT).
Use extreme care when turning
rotating assembly. Rotating
assembly is sharp and injury to
personnel may result.
NOTE
Rotating assembly is turned to
coat internal surface of
turbocharger.
(11)
Turn rotating assembly (29) by hand.
(12)
Fill turbocharger center housing (19) with
lubricating oil.
(13)
Connect oil inlet tube (18) on top of
turbocharger center housing (19) and
tighten fitting (17).
(14)
Install exhaust tube (15) on turbocharger
turbine housing (16).
(15)
Install clamp (14) on exhaust tube (15).
(16)
Tighten nut (13) on clamp (14).
(17)
Install air inlet tube (11) on turbocharger
compressor housing (12).
(18)
Install clamp (10) on air inlet tube (11).
(19)
Tighten nut (9) on clamp (10).
|
