|
| |
TM 9-2320-364-34-2
5-21
(7)
Loosen clamp (12) on hose (13) on top of
water pump (5).
(8)
Loosen clamp (14) on bottom of water
pump (5).
(9)
Remove screw (15), lockwasher (16) and
washer (17) from rear right of water
pump (5). Discard lockwasher.
(10)
Remove two screws (18) and
lockwashers (19) from water pump (5).
Discard lockwashers.
(11)
Remove water pump (5) from engine (20).
(12)
Remove and discard seal ring (21) from
water pump (5).
(13)
Cover water hoses (13) and (22) with clean
rag to prevent debris from entering water
system.
b.
Installation.
(1)
Remove rag from water hoses (13) and (22).
(2)
Install seal ring (21) in water pump (5).
(3)
Loosen clamp (23) and push hose (22)
downward on water tube (24).
(4)
Loosen clamp (25) and push hose (13)
upward on water tube (26).
(5)
Install water pump (5) on engine (20) with
two lockwashers (19) and two screws (18).
Tighten screws to 45 to 50 lb-ft (61 to 68
N.m).
(6)
Install washer (17), lockwasher (16) and
screw (15) in right rear of water pump (5).
Tighten screw to 20 to 25 lb-ft (27 to 34
N.m).
(7)
Push hose (13) downward and position over
water pump (5).
(8)
Push hose (22) upward and position on
water pump (5).
(9)
Tighten clamps (14) and (23) on hose (22).
(10)
Tighten clamps (12) and (25) on hose (13)
on top of water pump (5) to 40 lb-in
(5 N.m).
|
