| |
TM 9-2320-364-34-2
5-28
5-8. SUCTION FAN ASSEMBLY REPLACEMENT (CONT).
b.
Installation.
Ensure suction fan is installed
with blade angle in same
position as noted prior to
removal. Failure to comply may
result in damage to equipment.
(1)
With the aid of an assistant, position suction
fan (3) on fan motor (4) until suction fan is
fully seated.
(2)
Install six lockwashers (2) and screws (1) in
suction fan (3). Tighten screws in sequence
shown to 80 lb-ft (108 N.m).
c.
Follow-On Maintenance:
Install radiator assembly, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|