|
| |
TM 9-2320-364-34-2
6-12
6-2. ALTERNATOR ASSEMBLY REPAIR (145 AMP) (CONT).
(5)
Position slip ring end housing (20) in press.
NOTE
Perform Step (6) only if bushing
was removed.
(6)
Install bushing (57) in slip ring end
housing (20).
NOTE
When properly installed, bearing
seats on lip in bearing bore.
(7)
Install bearing (58) in slip ring end
housing (20) and remove from press.
(8)
Coat rollers of bearing (58) with grease.
(9)
Install three studs (15) and nuts (55) in
brush housing (13).
(10)
Position gasket (56) and brush housing (13)
in slip ring end housing (20).
(11)
Install negative rectifier (37) in slip ring end
housing (20) with two bushings (54),
bushing (53), insulator (52), washer (51),
lockwasher (50) and screw (49).
(12)
Install screw (48) and nut (47) in negative
rectifier (37) and slip ring end housing (20).
48
47
53
50
49
37
20
52
51
54
54
|
