6-13. ENGINE WIRE HARNESS REPLACEMENT (CONT).
Connect MC11 connector (11) to bulkhead connector (12).
Install shield wires (9) and (8) and locknut (7) on stud (10).
Adhesives, solvents, and sealing compounds can burn easily can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a
well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
Coat stud (10) with electrical sealant.
Connect MC118 connector (6).