|
| |
TM 9-2320-364-34-2
6-166
6-19. CAB WIRE HARNESS REPLACEMENT (CONT).
(42)
Install two screws (121) and ECB light
harness MC2 connector (119) on
bracket (115) with two locknuts (120).
(43)
Install two screws (117) and control box
harness MC1 connector (114) on
bracket (115) with two locknuts (116).
(44)
Connect control box harness MC1
connector (114) and tighten center
screw (113).
(45)
Connect ECB light harness MC2
connector (119) and tighten center
screw (118).
NOTE
Perform Step (46) if disconnected during removal.
(46)
Connect chemical alarm MC104 connector (112).
(47)
Connect LHS MC33 connector (111).
|
