Evenly distribute any slack
Install cable ties as required.
Position STE/ICE-R alternator harness (14)
Remove nut (10) from F-positive
terminal (13) and install wire 1953 (12),
lockwasher (11) and nut on F-positive
Remove nut (6) from positive terminal (9)
and install wire 1820 (8), lockwasher (7)
and nut on positive terminal.
Remove nut (2) from negative terminal (5)
and install wire 1815 (4), lockwasher (3) and
nut on negative terminal.
Adhesives, solvents, and sealing
compounds can burn easily can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Apply electrical sealant to F positive
terminal (13), positive terminal (9), and
negative terminal (5).
Connect MC40 connector (1).
Install left front noise panel, (TM 9-2320-364-20).
Connect batteries, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK