|
| |
TM 9-2320-364-34-2
6-233
NOTE
There may or may not be locknuts
present in Step (5).
Cushion clips may be installed under
locknuts or under nuts and
lockwashers. If mounted under
locknuts, do not remove nuts and
lockwashers.
(5)
Remove two locknuts (9), and cushion clips
(10), nuts (11), and lockwashers (12) from air
tank brackets (13). Discard lockwashers and
locknuts.
(6)
Remove CTIS chassis wire harness (8) from
two cushion clips (10).
(7)
Disconnect MC109 connector (14) from
front CTIS manifold (15).
(8)
Remove screw (16) and lockwasher (17) from CTIS front manifold valve cover (18). Discard
lockwasher.
|
