|
| |
TM 9-2320-364-34-2
6-290
6-30. CRANE WIRING REPLACEMENT (CONT).
NOTE
Disconnect only wires
required to complete task.
Refer to Table 6-5 and
Figure 6-2 for specific
junction box wiring
replacement.
Tag and mark wires prior to
removal.
Cut cable ties as required.
(b)
Disconnect harness wires (5) from
terminal strip (6), ground strip (7) and
diodes (8) in junction box (4).
NOTE
Remove only harnesses and
caps required to complete
task. Refer to Table 6-5 and
Figures 6-2 and 6-3.
All harnesses and caps are
removed from junction box
the same way.
(c)
Remove cap (9), washer (10),
grommet (11) and harness (12) from
junction box (4) as required.
|
