7-9. TRANSMISSION YOKE/DUST SHIELD/OIL SEAL REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Apply sealing compound to threads of four
Install four screws (2), two bearing straps (3)
and driveshaft (1) on Axle No. 2 yoke (4).
Tighten screws to 130 lb-ft (176 N.m).
Install right side skirt, (TM 9-2320-364-20).
Check and fill transmission oil, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK