Position flywheel (1) on wooden blocks with
torque converter turbine (10) facing upward.
Torque converter turbine must
be evenly pried up and off of
flywheel. Use wiping rags at two
pry points to prevent scoring or
other damage to torque
converter turbine or flywheel.
Remove torque converter housing (10)
from flywheel (1).
Position torque converter housing (10) with
bearing (11) facing upward and, using two-
jaw puller, remove bearing (11) from torque
converter turbine hub (12).
Remove backplate (13) and lockup clutch
plate (14) from flywheel (1).