Pull support bracket (6) out to clear neutral start switch (22).
Feed neutral start connector wires (20) through hole in support bracket (6).
Failure to clear neutral start switch during support bracket removal could damage
neutral start switch.
Remove support bracket (6) from transfer case (8) and two upper mounts (23).
(m) Remove two upper mounts (23) from right frame bracket (24).
If frame bracket is bent, cracked or has other damage, perform Step (n).
With the aid of an assistant, remove six locknuts (25), right frame bracket (24), four screws (26) and
two screws (27) from frame (17). Discard locknuts.