| |
TM 9-2320-364-34-2
9-42
9-8. AXLE NO. 1, 2, AND 5 CONSTANT VELOCITY JOINT REPAIR (CONT).
(8)
Coat bearing (7) with light coat of grease.
(9)
Install bearing (7) in axle housing (4).
Use care when installing retaining rings. Retaining rings are under tension and can act as
projectiles when released and could cause severe eye injury.
(10)
Install retaining ring (6) in axle housing (4).
(11)
Coat seal (5) with a light coat of grease.
(12)
Install seal (5) in axle housing (4).
(13)
Install constant velocity shaft (3) in axle housing (4).
(14)
Repeat Steps (2) through (13) for remaining shaft.
|